Serving Wyoming Open 7 days · Mon–Fri 7AM–8PM Licensed & insured · 90-day warranty (844) 442-1999
Call for an upfront quote(844) 442-1999
Serving Wyoming

Frymaster Floor Fryer Repair in Wyoming

Need Frymaster floor fryer repair in Wyoming? We find the actual cause, explain it in plain terms, give you a price before we start and back the finished repair with a 90-day parts-and-labor warranty.

Call (844) 442-1999 Book online
  • Upfront quote before work
  • 90-day parts & labor warranty
  • Parts matched to your model
  • Same-day service when available

Request service

Tell us what's wrong. We'll call you back to schedule.

We only use your details to arrange the repair. No spam.

or call now
(844) 442-1999
Licensed & insuredFully insured technicians
90-day warrantyOn parts and labor
Upfront pricingApprove the price first
248 appliance types426 brands serviced
Frymaster specialists

Repairing Frymaster Floor Fryers

Repairs on a Frymaster floor fryer go faster when the part is matched to the model. We record the model and serial number at the start of the visit and check the manufacturer's service information for that unit.

How we repair your Frymaster Floor Fryer

A floor fryer is a freestanding commercial gas or electric fryer with a deep stainless vat, a cabinet base and often built-in oil filtration. Every floor fryer has a heat source, a thermostat or computer control, a high-limit safety switch and an oil vat, plus pilot or ignition parts on gas models. A technician checks ignition or elements, thermostat accuracy and the high-limit, and inspects the vat and drain valve for leaks.

Fryers are often the busiest station in a restaurant, so a down fryer is handled as a priority call.

Frymaster Floor Fryer repair at a glance

  • Typical repair cost$150–$500
  • Typical service life7–12 years
  • Warranty on repairs90 days parts & labor
  • QuoteUpfront, before work
  • Same-day visitsWhen available
Call (844) 442-1999
Diagnosis

Common Frymaster Floor Fryer problems we fix

What usually causes each symptom, and what our technician checks to confirm it.

High-limit trips during service

Likely causes
A thermostat or probe failing to cycle off, or a low oil level exposing the heat zone.
What our technician checks
The thermostat and high-limit are tested and the probe reading is compared with a reference thermometer.

Pilot will not stay lit

Likely causes
A weak thermopile or thermocouple, a dirty pilot orifice or a failing gas valve.
What our technician checks
Millivolt output is measured and the pilot assembly is cleaned and inspected.

Built-in filter pump not working

Likely causes
A seized pump motor, a clogged filter pan screen or a tripped motor overload.
What our technician checks
Pump motor current and operation are tested and the filter lines are checked for blockage.

Oil not reaching set temperature

Likely causes
Low gas pressure, carbon-clogged burner tubes or a failed element on electric models.
What our technician checks
Manifold pressure is measured and burners or elements are inspected and tested.

Computer control error codes

Likely causes
A faulty temperature probe, a failed ignition module or a bad control board.
What our technician checks
The error code is read and the probe, ignition and board inputs are tested.

Drain valve leaks or sticks

Likely causes
Carbon buildup in the valve body or worn valve seals.
What our technician checks
The valve is inspected after the vat is cooled and drained.
Before you call

Quick checks you can do safely

  • Confirm the gas valve is open and the unit is plugged in.
  • Check that oil is at the fill line before lighting.
  • Clean the filter pan screen and reseat the pan fully.
  • Relight the pilot using the instructions on the unit.
  • Note any error code shown on the controller.

Safety first: Hot oil and gas create burn and fire hazards, so the fryer must be shut off, cooled and drained before service.

Still not working?

Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.

(844) 442-1999

Seeing a code? Try our error code lookup or troubleshooting wizard.

How it works

Our 5-step floor fryer repair process

  1. Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
  2. DiagnosisThe technician inspects and tests the floor fryer to find the actual cause, not just the symptom.
  3. Upfront quoteYou get a clear price before any work starts. No surprise charges.
  4. RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
  5. Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Pricing

Frymaster Floor Fryer repair cost and lifespan

Typical repair cost$150–$500
Typical service life7–12 yrs

National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.

Parts we replace most often

  • Thermopile
  • Gas valve
  • High-limit switch
  • Temperature probe
  • Filter pump motor
  • Drain valve
  • Burner tubes

We match every part to your model and serial number.

Maintenance

Keep your Frymaster Floor Fryer running longer

  • Check casters and the gas hose restraint cable.
  • Keep the flue and burner area free of carbon.
  • Filter oil at least daily during service.
  • Schedule a yearly gas and calibration check.
  • Boil out the vat on a regular schedule.

Build a maintenance plan

Create a printable monthly, quarterly and yearly checklist for every appliance in your home.

Open the schedule generator
Local service

Frymaster Floor Fryer repair in Wyoming

High altitude, dry air and cold winters in Wyoming affect how ovens, ranges, dryers and water heaters in Wyoming perform.

We provide floor fryer repair in cities and towns across Wyoming, from large metro areas to smaller communities.

Parts of Wyoming sit at high elevation, where gas appliances may need high-altitude orifices or adjustments to burn cleanly and heat correctly.

Also serving nearby

Choose your city on the Wyoming page for local details.

Brands

Floor Fryer brands we repair

FAQ

Frequently Asked Questions

How much does Frymaster floor fryer repair cost in Wyoming?

Most Frymaster floor fryer repairs fall roughly between $150 and $500, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.

Can you repair my Frymaster floor fryer the same day?

Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.

Is the repair guaranteed?

Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.

Which brands do you service?

We work on all major brands, including Frymaster, Imperial, Pitco and Vulcan.

Should I repair or replace my Frymaster floor fryer?

A typical Frymaster floor fryer lasts about 7 to 12 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.

Related

Other fryers repairs

More repair services

Get your floor fryer fixed in Wyoming

Upfront quote before work starts · Parts matched to your model · 90-day warranty

(844) 442-1999 Book online
Call now Book